Nowadays, many people are looking to buy ceiling panels. The use of these panels is increasing because they distribute light evenly and properly. Also, the energy consumption of these panels is much less and more economical than the old types. Ceiling panels are suitable for all types of commercial, office and residential environments and can be used everywhere. In this article, we will explain briefly about this popular product.
Advantages of buying ceiling panels
1. They have a lot of variety
In terms of shape, these panels are made in various types, such as panels for Kenaf roofs, tile roof panels, and clean room (hospital) panels. Also, according to the installation location, they have two types of built-in and facing. You can buy the required ceiling panel according to your needs.
2. They do not cause eye damage and fatigue
Ceiling panels provide adequate and appropriate ambient light, but do not harm the eyes and are not annoying.
3. Ceiling panels have excellent light efficiency.
Ceiling panels have better light efficiency than old models. You can illuminate large areas with a limited number of LED panels.
4. Ceiling panels have a longer life.
These panels are designed and produced in such a way that they are not damaged due to high voltage or continuous light. That’s why you don’t have to worry about burning or constantly changing the light.
Types of ceiling panels
1. Rabbits roof panels (for Kenaf roofs)
For roofs made of kenaf, special kenaf or rabits roof panels should be used, because springs are installed behind these panels. These springs make the light fit well inside the ceiling.
2. Clean room panels (hospital)
The clean room panel is for the hospital environment. These panels should be designed in such a way that if it ever breaks, the service worker can easily repair the light from above without entering the operating room, so that contamination does not enter the sterile space of the operating room.
Types of ceiling panels in terms of installation
In terms of installation, ceiling panels are divided into two categories: surface and built-in. In the following, we will examine the differences between built-in and facing ceiling panels.
a. Recessed ceiling panels
If you want to lighten environments that have a short ceiling, the best choice is to buy short ceiling panels. Also, these panels are a suitable option for use in short ceilings. They stick perfectly to the ceiling and sink into it, so that they are flush with the ceiling.
B. Facing ceiling panels
Another type of ceiling panels is veneered ceiling panels. These panels can be used anywhere. This panel is connected to the ceiling by means of a tract and frame.
What points should be considered when buying ceiling panels?
- When buying, you should pay attention that the product has safety standards. For example, ceiling panels should have hanging wires to prevent unexpected events such as earthquakes.
- When buying ceiling panels, make sure that the panels have a protective frame for the driver to resist possible moisture penetration.
- It is better that the purchased product has a warranty so that you don’t get into trouble in case of possible damage.
- To buy ceiling panels, note that the product, in addition to being light and light, has a long life.
The advantage of buying LED ceiling panels from Meh Sazan Company:
Danesh Banian Meh Sazan Company has a lot of experience in manufacturing and designing all kinds of LED panels. The products of this company are a very suitable option for buying ceiling panels.
- The body of the product is made of tin plate steel, which has a high cooling capacity due to the light weight and thinness of the sheet.
- The use of 324 LEDs, whose high density ensures uniformity of light and long life of the product.
- The angle of 135 degrees, which is designed with the angle of smd light radiation, makes you not see any dark spots on the light screen and take advantage of all the light of the lamp.
- In these panels, plastic pins made of Hosta Form materials are used instead of metal screws and nuts. In our lamp, no metal screws are used and the connections are made by plastic pins. Because when a metal screw is used in the construction of the panel, if the screw is tightened a little tighter than usual, it causes scratches on the surface of the LED board, and this scratch causes a connection and eventually burns the lamp. By using plastic pins, it is no longer possible to make a connection.
- The terminals used in the product are earthed.
- In this product, the protective frame of the driver is used to prevent possible water penetration.
- The ceiling panels have a hanging wire mechanism to prevent the lamp from falling freely during unexpected events (earthquakes).
- The outer frame of the working view is implemented with a 6 mm edge. This feature makes it possible when placing the light on the ceiling. There is no trace of the lamp body anymore and only the light plate can be seen on the ceiling.
- This product has a 5-year warranty and 10-year after-sales service.
An example of ceiling panels is 60×60 backlight. This unique lamp has been designed and produced by the technical and engineering team of Danesh Banyan Meh Sazan Company.
final word
Danesh Banian Meh Sazan Company is a designer and producer of different models of LED panels. This company has been able to meet all the needs of its customers in the field of lighting by attracting expert and efficient staff and by producing cost-effective and quality products, it has been named as one of the best mass producers of lighting panels. With the aim of improving productivity, higher accuracy, reducing production time and lower costs, Meh Sazan Company has all products customized.